DH Satellite, Inc. manufactures commercial-grade, sectional & one-piece, spun aluminum antennas in sizes from .6m up to 5m. All DH Antennas have high efficiency gain with specifications available on C and KU band. Mounts include: Fixed Az-El, HD polar tracking, the Horizon-to-Horizon tracking & the top-of-the-line Fixed or Motorized Az-El Gibralter Series, rated to survive winds of 194 mph. Sectional antennas ship common carrier with DH truck delivery for your one-piece systems. Hot dip galvanizing available.
DH Satellite, Inc. The DH 5m 8pc antenna Fixed Gibralter, SURVIVAL of 194 MPH for high winds locations. DH 3.7m 4 piece with 48” Fixed az-el for pole mounted system now standard. Available Antenna sizes include 3m to 5m Solid spun aluminum, sectional and one piece antennas. Custom base cans allow adapting to existing post at site. Contact DH Satellite today to learn more about our sectional antenna line.
Superior Satellite Since 1983, the 8345 4.5M antenna has been in continuous production starting with SA, then ViaSat, and now Superior Satellite. This high-quality, commercial-grade antenna leads the industry in gain, reliability and survivability. The reflector construction is 12 panels of stretch-stamped steel. The steel mount is tooled and machined for precision alignment during installation. Available in C-band (Tx/Rx), Ku-band(Rx), C/Ku-band (Rx), multi-feed, motorized and fixed.
ARRIS E6000 CER continues the highly successful legacy of the C4 CMTS and delivers new levels of density and cost-effectiveness for high-density markets in a simple, robust integrated architecture. All elements of the E6000 CER are redundant, either N+1 or 1+1, and all are hot-swappable which adds up to 99.999% system availability. Cable operators who deploy IPv6 with the E6000 will benefit from years of operational IPv6 experience gained with the C4 CMTS.
EMERGENCY ALERT SYSTEMS
Monroe Electronics continues to offer its DTMF and programmable switches, and remains the premier provider of EAS/CAP solutions for FCC compliance and management, featuring the One-Net™ SE series of products able to support any type of distribution – analog, digital (QAM), IPTV or any hybrid mix. With advanced features and support for variety of downstream equipment coupled with class-leading service and support pick the best, pick Monroe!
OOB AND R-PHY
Kronback Tracers The Kronback Tracers ND1 is placed in the CCAP core. It has two NDF channels (70 MHz to 1218 MHz) including FM radio and a HMS FSK transmission. 120 NDR channels with virtual HMS FSK reception equals the capacity of three HMTS gateways. It also includes a fully virtualized return path monitoring system, providing a complete OOB solution for the CCAP core.
ACI Communications, Inc. ED5229 High-power Multi-port EDFA optical amplifier with built in WDM Mux for existing PON integration to provide an RF overlay solution. Allows for deployments in outdoor cabinets as well as hubs and central offices. Available with 8, 16, 32 or 64 output ports and will fit into a 19 or 21 inch wide rack.
Alpha’s Cordex HP rectifiers are available in a wide array of power sizes from 250W to 12,000W per module, enabling the most compact and cost-effective power system design. Combining a unique blend of advanced features, high reliability and greater efficiency. Cordex rectifiers offer significant operational and capital savings.
RF MATRIX SWITCHES
Monroe Electronics model R232 MultiPort™ RF Routing System is a truly unique 32×2 switching matrix featuring +20db of gain from input to output, pulling signals up to valid testing levels without performance errors over its wide – 5MHz to 2GHz operating range, and the dual independent, non-blocking outputs are perfect for test monitoring different instruments or monitors on each output to speed performance testing like never before. Combined with Monroe’s CrossPoint Control Protocol (MXCP) over Ethernet makes port selection a breeze.